注册 登录  
 加关注
   显示下一条  |  关闭
温馨提示!由于新浪微博认证机制调整,您的新浪微博帐号绑定已过期,请重新绑定!立即重新绑定新浪微博》  |  关闭

讀萬卷書,行萬里路

开心快乐的方式有很多种,寻找自己的快乐方式

 
 
 

日志

 
 

Android-proc/kmsg  

2011-09-16 22:48:00|  分类: 我的安卓 |  标签: |举报 |字号 订阅

  下载LOFTER 我的照片书  |
<5>[    0.000000] Linux version 2.6.29.6_ngiordano_1 (nelson@nelson-W3650) (gcc version 4.2.1) #3 PREEMPT Sun Jul 31 08:04:40 EDT 2011
<4>[    0.000000] CPU: ARMv6-compatible processor [4117b362] revision 2 (ARMv6TEJ), cr=00c5387f
<4>[    0.000000] CPU: VIPT aliasing data cache, VIPT aliasing instruction cache
<4>[    0.000000] Machine: Morrison
<6>[    0.000000] mot_fixup: smi_64m=1, ddr_mono=1
<6>[    0.000000] mot_fixup: mot_hw_rev=a00
<6>[    0.000000] mot_fixup: cmdline="no_console_suspend=1 console=null quiet androidboot.serialno=TA1880EW85"
<4>[    0.000000] mot_fixup: bank[0]=10000000@10000000
<4>[    0.000000] mot_fixup: bank[1]=8000000@20000000
<4>[    0.000000] mot_fixup: ramconsole_resource[0]=2c96000..2cb6000
<4>[    0.000000] mot_fixup: msm_fb_resources[0]=2c00000..2c96000
<4>[    0.000000] mot_fixup: android_pmem_pdata.start=0
<4>[    0.000000] mot_fixup: android_pmem_adsp_pdata.start=2000000
<4>[    0.000000] mot_fixup: resources_hw3d[2].start=0
<4>[    0.000000] Ignoring unrecognised tag 0x00000000
<6>[    0.000000] Partition (from atag) boot -- Offset:168 Size:18
<6>[    0.000000] Partition (from atag) system -- Offset:180 Size:456
<6>[    0.000000] Partition (from atag) userdata -- Offset:5d6 Size:6fc
<6>[    0.000000] Partition (from atag) misc -- Offset:cd2 Size:2
<6>[    0.000000] Partition (from atag) recovery -- Offset:cd4 Size:28
<6>[    0.000000] Partition (from atag) cache -- Offset:cfc Size:300
<6>[    0.000000] Partition (from atag) splash -- Offset:ffc Size:4
<4>[    0.000000] Memory policy: ECC disabled, Data cache writeback
<7>[    0.000000] On node 0 totalpages: 65536
<7>[    0.000000] free_area_init_node: node 0, pgdat c05dd480, node_mem_map c075a000
<7>[    0.000000]   Normal zone: 512 pages used for memmap
<7>[    0.000000]   Normal zone: 0 pages reserved
<7>[    0.000000]   Normal zone: 65024 pages, LIFO batch:15
<6>[    0.000000] Allocating 8388608 bytes at c1040000 (11040000 physical) for pmem
<6>[    0.000000] Allocating 8388608 bytes at c1900000 (11900000 physical) for gpu1 pmem
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
<5>[    0.000000] Kernel command line: no_console_suspend=1 console=null quiet androidboot.serialno=TA1880EW85
<3>[    0.000000] Unknown boot option `androidboot.serialno=TA1880EW85': ignoring
<4>[    0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
<4>[    0.000000] Console: colour dummy device 80x30
<6>[    0.000361] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.001805] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>[    0.023428] Memory: 256MB = 256MB total
<5>[    0.023471] Memory: 235520KB available (5572K code, 1759K data, 152K init)
<6>[    0.024015] Calibrating delay loop... 527.56 BogoMIPS (lpj=2637824)
<4>[    0.270516] Mount-cache hash table entries: 512
<6>[    0.271480] CPU: Testing write buffer coherency: ok
<6>[    0.275578] net_namespace: 984 bytes
<6>[    0.276956] NET: Registered protocol family 16
<6>[    0.278148] socinfo_init: v2, id=16, ver=2.0, raw_id=368, raw_ver=3
<6>[    0.278185] acpu_clock_init()
<6>[    0.278356] L val: PLL0: 12, PLL1: 50, PLL2: 55
<6>[    0.278385] Turbo mode supported and enabled.
<6>[    0.278455] ACPU running at 528000 KHz
<6>[    0.278481] Id CPU-KHz PLL DIV AHB-KHz ADIV AXI-KHz D0 D1 D2 U0 U1 U2
<6>[    0.278513]  0   19200  -1   1   19200    1   30720 -1 -1 -1  4  1  3
<6>[    0.278543]  1  120000   1   8   60000    2   61440 -1 -1 -1  4  5  6
<6>[    0.278573]  2  122880   0   2   61440    2   61440 -1  1 -1  4  5  6
<6>[    0.278603]  3  176000   2   6   88000    2   61440  2  1 -1  4  5  6
<6>[    0.278631]  4  245760   0   1   81920    3   61440  2  1  3 -1  7  6
<6>[    0.278661]  5  320000   1   3  107000    3  120000  2  1  3 -1  7  9
<6>[    0.278691]  6  352000   2   3   88000    4  120000  2  1  3 -1  7 10
<6>[    0.278721]  7  480000   1   2  120000    4  120000  4  5  6 -1 -1 17
<6>[    0.278751]  8  528000   2   2  132000    4  160000 -1  5  6 -1 -1 18
<6>[    0.278781]  9  576000   2   2  132000    4  160000 -1  5  6 -1 -1 18
<6>[    0.278811] 10  595200   2   1  153600    4  160000 -1  7  6 -1 -1 18
<6>[    0.278841] 11  614400   2   1  153600    4  160000 -1  7  8 -1 -1 18
<6>[    0.278871] 12  633600   2   1  153600    4  160000 -1  7  8 -1 -1 18
<6>[    0.278901] 13  652800   2   1  153600    4  160000 -1  7  8 -1 -1 18
<6>[    0.278930] 14  672000   2   1  153600    4  160000 -1  7  8 -1 -1 18
<6>[    0.278960] 15  691200   2   1  172800    4  160000 -1  7  8 -1 -1 18
<6>[    0.278990] 16  710400   2   1  172800    4  160000 -1  7  8 -1 -1 18
<6>[    0.279020] 17  729600   2   1  172800    4  160000 -1  7  8 -1 -1 18
<6>[    0.279050] 18  748800   2   1  172800    4  160000 -1 -1  8 -1 -1 -1
<6>[    0.279073] 15 scaling frequencies supported.
<6>[    0.279121] morrison_setup, hw_rev: a00 ...
<4>[    0.296035] bio: create slab <bio-0> at 0
<6>[    0.297733] usbcore: registered new interface driver usbfs
<6>[    0.297956] usbcore: registered new interface driver hub
<6>[    0.298388] usbcore: registered new device driver usb
<6>[    0.298873] msm_i2c_probe
<6>[    0.299048] msm_i2c_probe: clk_ctl 35a, 100000 Hz
<6>[    0.301170] accel_probe: I2C device with address 0x18 is LIS331DLH accelerometer
<6>[    0.301203] accel_probe: swapped axes parameter 0x00
<6>[    0.301225] accel_probe: platform data for 'stmicro', num_resources 1
<6>[    0.301268] accel_irq_config_edge: GPIO 18 configured as an interrupt line, irq 82, current value 0
<6>[    0.301443] accel_irq_config_edge: irq = 82
<6>[    0.301896] input: accelerometer as /devices/virtual/input/input0
<6>[    0.301938] accel_probe: registered input device accelerometer
<6>[    0.301951]
<6>[    0.301981] accel_i2c_set_config: mode=0 (power off), odr=0 (10Hz), fs=0, interval=100
<6>[    0.301998]
<6>[    0.304795] accel_probe: registered misc device
<6>[    0.304810]
<6>[    0.304876] accel_probe: created sysfs group
<6>[    0.304888]
<6>[    0.304906] accel_probe: driver probed successfully
<6>[    0.306931] Bluetooth: Core ver 2.15
<6>[    0.307643] NET: Registered protocol family 31
<6>[    0.307673] Bluetooth: HCI device and connection manager initialized
<6>[    0.307701] Bluetooth: HCI socket layer initialized
<6>[    0.308168] cfg80211: Using static regulatory domain info
<6>[    0.308198] cfg80211: Regulatory domain: US
<6>[    0.308216]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[    0.308241]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
<6>[    0.308266]     (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
<6>[    0.308291]     (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
<6>[    0.308316]     (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
<6>[    0.308340]     (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
<6>[    0.308365]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
<6>[    0.308390] cfg80211: Calling CRDA for country: US
<6>[    0.308993] accel_irq_bottom_half_job: status 0x00, src_1 0x00, src_2 0x00  force 0
<7>[    0.310341] Switched to high resolution mode on CPU 0
<6>[    0.311700] NET: Registered protocol family 2
<6>[    0.312053] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.312893] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
<6>[    0.313563] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
<6>[    0.313903] TCP: Hash tables configured (established 8192 bind 8192)
<6>[    0.313926] TCP reno registered
<6>[    0.314350] NET: Registered protocol family 1
<6>[    0.314976] checking if image is initramfs... it is
<6>[    0.393736] Freeing initrd memory: 252K
<3>[    0.397261] prevening battery charge since battery temp cannot be obtained
<6>[    0.398040] HEADSET: Registering headset driver
<6>[    0.399153] input: headset as /devices/virtual/input/input1
<6>[    0.399603] smd probe
<6>[    0.399630] smd_core_init()
<6>[    0.399766] smd_core_init() done
<3>[    0.400183] _smem_log_init: no power log or log_idx allocated, smem_log disabled
<6>[    0.401333] smd_alloc_channel() 'DS' cid=0
<6>[    0.401618] smd_alloc_channel() 'DIAG' cid=1
<6>[    0.401801] smd_alloc_channel() 'RPCCALL' cid=2
<6>[    0.401970] smd_alloc_channel() 'DATA1' cid=7
<6>[    0.402158] smd_alloc_channel() 'DATA2' cid=8
<6>[    0.402335] smd_alloc_channel() 'DATA3' cid=9
<6>[    0.402528] smd_alloc_channel() 'DATA4' cid=10
<6>[    0.402693] smd_alloc_channel() 'DATA5' cid=11
<6>[    0.402855] smd_alloc_channel() 'DATA6' cid=12
<6>[    0.403030] smd_alloc_channel() 'DATA7' cid=13
<6>[    0.403195] smd_alloc_channel() 'DATA11' cid=17
<6>[    0.403366] smd_alloc_channel() 'DATA5_CNTL' cid=38
<6>[    0.403531] smd_alloc_channel() 'DATA6_CNTL' cid=39
<6>[    0.403705] smd_alloc_channel() 'DATA7_CNTL' cid=40
<6>[    0.407136] SMD Control Port Driver Initialized.
<6>[    0.408281] SMD: ch 2 CLOSED -> OPENING
<6>[    0.408411] SMD: ch 2 OPENING -> OPENED
<3>[    0.408988] Using very old AMSS modem firmware.
<6>[    0.409215] [adsp:adsp.c:adsp_init] rs3000000a:00010000 -- 0
<3>[    0.431478] rpcrouter: Server create rejected, version = 0, program = 30000012
<3>[    0.431546] rpcrouter: Server create rejected, version = 0, program = 3000fe00
<3>[    0.433750] rpcrouter: Server create rejected, version = 0, program = 30000066
<6>[    0.446281] ashmem: initialized
<4>[    0.449763] yaffs Jul 30 2011 17:22:42 Installing.
<6>[    0.449880] msgmni has been set to 460
<6>[    0.454731] alg: No test for stdrng (krng)
<6>[    0.454898] io scheduler noop registered
<6>[    0.454923] io scheduler anticipatory registered
<6>[    0.454943] io scheduler deadline registered
<6>[    0.455175] io scheduler cfq registered
<6>[    0.455375] io scheduler bfq registered (default)
<6>[    0.456115] msm_fb_probe:  phy_Addr = 0x2c00000 virt = 0xd0900000
<6>[    0.457556] MDP HW Base phy_Address = 0xaa200000 virt = 0xd0c00000
<6>[    0.458228] primary mddi base phy_addr = 0xaa600000 virt = 0xd081e000
<4>[    0.479335] mddi_tpo_nv_init: client_id=0x0, crc=0x5D13, width=320, height=480
<4>[    0.600621] mddi_tpo_nv_seq_init: Found TPO vG Display
<4>[    0.918721] Console: switching to colour frame buffer device 40x30
<6>[    1.235819] FrameBuffer[0] 320x480 size=614400 bytes is registered successfully!
<6>[    1.235844] CONFIG_FB_MSM_LOGO is enabled
<4>[    1.235946] load_565rle_image: Can not open /logo.rle
<6>[    1.235969] Called load_565rle_image -2
<6>[    1.236464] lmxxxx_set_pwm: setting PWM to 0
<4>[    1.237389] tvenc: probe of tvenc.327680 failed with error -1
<3>[    1.256066] dcc_tty_probe: probing to DCC failed
<6>[    1.256249] msm_serial: detected port #2
<6>[    1.256424] msm_serial.2: ttyMSM2 at MMIO 0xa9c00000 (irq = 11) is a MSM
<6>[    1.257176] msm_serial: driver initialized
<6>[    1.257638] msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 45) is a MSM HS UART
<6>[    1.258366] msm_serial_hs module loaded
<6>[    1.262981] brd: module loaded
<6>[    1.267069] loop: module loaded
<6>[    1.267203] pmem: 1 init
<6>[    1.268143] pmem_adsp: 0 init
<6>[    1.269198] Android kernel panic handler initialized (bind=kpanic)
<6>[    1.269429] fun camera_misc_init camera misc init
<6>[    1.269441]
<6>[    1.269801] PPP generic driver version 2.4.2
<6>[    1.270138] NET: Registered protocol family 24
<6>[    1.270224] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
<6>[    1.270364] CSLIP: code copyright 1989 Regents of the University of California.
<6>[    1.271291] tun: Universal TUN/TAP device driver, 1.6
<6>[    1.271316] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>[    1.272036] rmnet0 (): not using net_device_ops yet
<6>[    1.272894] rmnet1 (): not using net_device_ops yet
<6>[    1.273703] rmnet2 (): not using net_device_ops yet
<6>[    1.274443] Linux video capture interface: v2.00
<6>[    3.034516] msm_v4l2: msm_v4l2_init
<6>[    3.035656] msm_nand: phys addr 0xa0a00000 dmac 0x7
<6>[    3.035728] allocated dma buffer at ffa2e000, dma_addr 1fbbc000
<6>[    3.036203] ONFI probe : CRC Check failed on ONFI Parameter data
<6>[    3.036336] status: e00020
<6>[    3.036356] nandid: 5510bcad maker ad device bc
<6>[    3.036378] Found a supported NAND device
<6>[    3.036393] NAND Id  : 0x5510bcad
<6>[    3.036408] Buswidth : 16 Bits
<6>[    3.036421] Density  : 512 MByte
<6>[    3.036434] Pagesize : 2048 Bytes
<6>[    3.036449] Erasesize: 131072 Bytes
<6>[    3.036463] Oobsize  : 64 Bytes
<6>[    3.036478] CFG0 Init  : 0xe85408c0
<6>[    3.036491] CFG1 Init  : 0x0004745e
<6>[    3.036506] ECCBUFCFG  : 0x00000203
<5>[    3.036538] Creating 7 MTD partitions on "msm_nand":
<5>[    3.036566] 0x000002d00000-0x000003000000 : "boot"
<5>[    3.038019] 0x000003000000-0x00000bac0000 : "system"
<5>[    3.039029] 0x00000bac0000-0x000019a40000 : "userdata"
<5>[    3.040038] 0x000019a40000-0x000019a80000 : "misc"
<5>[    3.041198] 0x000019a80000-0x000019f80000 : "recovery"
<5>[    3.042269] 0x000019f80000-0x00001ff80000 : "cache"
<5>[    3.043318] 0x00001ff80000-0x000020000000 : "splash"
<6>[    3.045544] usbcore: registered new interface driver cdc_acm
<6>[    3.045589] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
<6>[    3.045944] msm_hsusb_rpc_connect: rpc connect success vers = 10001
<6>[    3.045986] msm_chg_rpc_connect: connected to rpc vers = 10001
<6>[    3.046129] usb_set_composition: composition set to product id = 2d67
<6>[    3.046154] phy info:(2)
<6>[    3.046309] usb_probe() io=d082c000, irq=47, dma=ffa2f000(1fbc6000)
<6>[    3.054696] msm_hsusb_reset_rework_installed: rework: (16777216)
<6>[    3.054728] usb_probe: reset rework is installed
<6>[    3.055664] Created the sysfs entry successfully
<6>[    3.057323] usb_function_register: name = 'adb',  map = 1
<6>[    3.057683] usb_function_register: name = 'usb_mass_storage',  map = 4
<6>[    3.057716] usb_set_composition: composition set to product id = 2d67
<3>[    3.058383] msm_hsusb_is_serial_num_null: rpc call success
<3>[    3.059099] msm_hsusb_send_serial_number: rpc call failed! error: -22
<3>[    3.060013] msm_hsusb_send_productID: rpc call success
<6>[    3.060044] msm_hsusb: functions bound. starting.
<6>[    3.060064] usb_bind_func() (usb_mass_storage)
<3>[    3.060623] usb_start: pm_app_rpc connect failed
<6>[    3.061413] usb_function_register: name = 'diag',  map = 0
<6>[    3.062154] usb_function_register: name = 'modem',  map = 3
<6>[    3.062199] usb_function_register: name = 'ethernet',  map = 2
<6>[    3.064176] sfh7743_probe: Enter....
<6>[    3.064734] input: proximity as /devices/virtual/input/input2
<6>[    3.065538] sfh7743_probe: initialized gpio_int[29]irq[93] gpio_en[16]
<7>[    3.066019] RTC Registering with rs30000048:00020000
<7>[    3.067206] msm_rtc: dev (254:0)
<6>[    3.067291] rs30000048:00020000 rs30000048:00020000: rtc core: registered msm_rtc as rtc0
<7>[    3.067676] msm_rtc_secure: dev (254:1)
<6>[    3.067699] rs30000048:00020000 rs30000048:00020000: rtc core: registered msm_rtc_secure as rtc1
<6>[    3.067846] i2c /dev entries driver
<3>[    3.068446] i2c_bit_add_numbered_bus
<6>[    3.068889] i2c-gpio i2c-gpio.1: using pins 61 (SDA) and 60 (SCL, no clock stretching)
<6>[    3.069231] sfh7743: presence [1e]
<6>[    3.069451] msm_hsusb_phy_reset
<6>[    3.193489] hsusb suspend interrupt
<4>[    3.340546] ADP5588 Keypad Dev ID : 0x4,Body ID 0  Name : adp5588_morrison , RST 1
<6>[    3.341114] input: adp5588_morrison as /devices/virtual/input/input3
<6>[    3.341621] ADP5588 : Start keypad adp5588_morrison in interrupt mode irq 85
<6>[    3.361661] input: compass as /devices/virtual/input/input4
<6>[    3.363958] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
<6>[    3.364131] Bluetooth: HCI UART driver ver 2.2
<6>[    3.364161] Bluetooth: HCI H4 protocol initialized
<6>[    3.364181] Bluetooth: HCI BCSP protocol initialized
<6>[    3.364199] Bluetooth: MSM Sleep Mode Driver Ver 1.1
<6>[    3.364689] BLUETOOTH: /proc/bt_power created
<6>[    3.364729] BLUETOOTH: /proc/bt_stat created
<6>[    3.364759] BLUETOOTH: /proc/bt_status created
<6>[    3.364788] BLUETOOTH: /proc/bt_irq created
<6>[    3.364811] BLUETOOTH: bt_power: Bluetooth power is off, and BT module is in reset.
<7>[    3.366773] msmsdcc_platform_status_irq: 81
<6>[    3.366813] mmc0: Slot status change detected (0 -> 1)
<6>[    3.367463] mmc0: Qualcomm MSM SDCC at 0x00000000a0400000 irq 24,81 dma 8
<6>[    3.367494] mmc0: 4 bit data mode enabled
<6>[    3.367511] mmc0: polling status mode disabled
<6>[    3.367531] mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
<6>[    3.367551] mmc0: Slot eject status = 0
<6>[    3.367568] mmc0: Power save feature enable = 1
<6>[    3.367589] mmc0: DM non-cached buffer at ffa31000, dma_addr 0x1fbf2000
<6>[    3.367613] mmc0: DM cmd busaddr 0x1fbf2000, cmdptr busaddr 0x1fbf2300
<6>[    3.368096] mot_sdcc_wifi_status_notify_register:  status_notify callback registered dev_ptr cfbb51e0
<6>[    3.368646] mmc1: Qualcomm MSM SDCC at 0x00000000a0500000 irq 26,0 dma 8
<6>[    3.368673] mmc1: 4 bit data mode enabled
<6>[    3.368689] mmc1: polling status mode disabled
<6>[    3.368708] mmc1: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
<6>[    3.368728] mmc1: Slot eject status = 1
<6>[    3.368744] mmc1: Power save feature enable = 1
<6>[    3.368766] mmc1: DM non-cached buffer at ffa32000, dma_addr 0x1fbf4000
<6>[    3.368788] mmc1: DM cmd busaddr 0x1fbf4000, cmdptr busaddr 0x1fbf4300
<6>[    3.369043] lm3535_init: enter
<6>[    3.369148] lm3535_probe: interim display
<6>[    3.369176] lm3535_probe: enter (morrison), I2C address = 0x38, flags = 0x0
<6>[    3.369204] lm3535_probe: morrison Pa00, resistor = 0x30, zones: 0x2 0xbd 0xfe 0xff
<6>[    3.380631] lm3535_setup: revision 5 (0x1)
<6>[    3.427828] hsusb resume: speed = HIGH
<6>[    3.427866] hsusb reset interrupt
<6>[    3.621546] hsusb reset interrupt
<6>[    3.623824] hsusb resume: speed = HIGH
<6>[    3.670303]
<6>[    3.670321] **** Charger Type: HOST PC
<6>[    3.670331]
<6>[    3.671149] msm_chg_usb_charger_connected
<6>[    3.671229] hsusb: IDLE -> ONLINE
<6>[    3.760543] lm3535_configure: ALS Register: 0xf8, zone 0
<6>[    3.761593] Registered led device: lcd-backlight
<6>[    3.761784] Registered led device: lcd-nr-backlight
<6>[    3.762581] input: als as /devices/virtual/input/input5
<6>[    3.763431] adp8862_init: enter
<3>[    3.763589] pm7540_btn_leds_init: enter
<3>[    3.764204] pm7540_btn_leds_probe: enter
<6>[    3.764421] Registered led device: button-backlight
<6>[    3.764584] Registered led device: button-tcmd
<3>[    3.764613] lm3535_als_is_dark: enter, zone = 0
<6>[    3.764631] pm7540_btn_leds_probe: ALS zone is 0
<6>[    3.764656] pm7540_btn_leds_probe: registered ALS callback 0xc02e5500
<3>[    3.764688] pm7540_soc_leds_init: enter
<3>[    3.765283] pm7540_soc_leds_probe: enter
<3>[    3.765304] pm7540_soc_leds_probe:morrison; returning
<4>[    3.765356] pm7540-soc-leds: probe of pm7540-soc-leds.0 failed with error -22
<3>[    3.765618] pm7540_kpd_leds_init: platform_driver_register returned 0
<3>[    3.765929] pm7540_kpd_leds_probe: morrison; returning.
<4>[    3.765974] pm7540-kpd-leds: probe of pm7540-kpd-leds.0 failed with error -22
<3>[    3.766004] pm7540_kpd_leds_init: platform_device_register returned 0
<3>[    3.766028] keypad_leds_init: enter
<6>[    3.766708] Registered led device: keyboard-backlight
<6>[    3.766886] Registered led device: keyboard1-backlight
<6>[    3.767048] Registered led device: keyboard2-backlight
<6>[    3.767199] Registered led device: keyboard-tcmd
<6>[    3.767379] Registered led device: keyboard1-tcmd
<6>[    3.767544] Registered led device: keyboard2-tcmd
<3>[    3.767571] lm3535_als_is_dark: enter, zone = 0
<6>[    3.767588] keypad_leds_probe: ALS zone = 0
<3>[    3.767619] fan5646_init: enter
<3>[    3.767876] fan5646_init: platform_driver_register returned 0
<6>[    3.768198] fan5646_probe: enter
<6>[    3.768401] Registered led device: messaging
<3>[    3.768461] fan5646_init: platform_device_register returned 0
<6>[    3.770088] logger: created 256K log 'log_main'
<6>[    3.770566] logger: created 256K log 'log_events'
<6>[    3.770878] logger: created 64K log 'log_radio'
<6>[    3.771198] logger: created 64K log 'log_system'
<6>[    3.771518] logger: created 64K log 'log_kernel'
<6>[    3.771546] console [logger-1] enabled
<6>[    3.771709] ram_console: got buffer at 2c96000, size 20000
<6>[    3.771816] ram_console: found existing buffer, size 32513, start 32513
<6>[    3.773359] console [ram-1] enabled
<6>[    3.774614] ramzswap: num_devices not specified. Using default: 1
<0>[    3.775354] Motorola software version: R6380E210_001.016<6>Advanced Linux Sound Architecture Driver Version 1.0.18a.
<4>[    3.776436] No device for DAI CODEC_DAI
<4>[    3.776479] No device for DAI CPU_DAI
<3>[    3.776888] msm_soc: create pcms
<6>[    3.777373] asoc: CODEC_DAI <-> CPU_DAI mapping ok
<3>[    3.777409] msm_soc: ALSA MSM Mixer Setting
<6>[    3.778944] ALSA device list:
<6>[    3.778991]   #0: msm-audio (MSM-CARD)
<4>[    3.779191] Netfilter messages via NETLINK v0.30.
<4>[    3.779383] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
<4>[    3.779958] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
<4>[    3.779999] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
<4>[    3.780029] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
<4>[    3.780208] ctnetlink v0.93: registering with nfnetlink.
<6>[    3.780771] xt_time: kernel timezone is -0000
<6>[    3.780908] IPv4 over IPv4 tunneling driver
<6>[    3.782369] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[    3.782813] arp_tables: (C) 2002 David S. Miller
<6>[    3.782928] TCP cubic registered
<6>[    3.783574] NET: Registered protocol family 10
<6>[    3.786404] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[    3.786558] IPv6 over IPv4 tunneling driver
<6>[    3.787903] NET: Registered protocol family 17
<6>[    3.788056] Bluetooth: L2CAP ver 2.13
<6>[    3.788086] Bluetooth: L2CAP socket layer initialized
<6>[    3.788131] Bluetooth: SCO (Voice Link) ver 0.6
<6>[    3.788154] Bluetooth: SCO socket layer initialized
<6>[    3.788598] Bluetooth: RFCOMM socket layer initialized
<6>[    3.788711] Bluetooth: RFCOMM TTY layer initialized
<6>[    3.788739] Bluetooth: RFCOMM ver 1.11
<6>[    3.788768] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[    3.788794] Bluetooth: BNEP filters: protocol multicast
<6>[    3.788821] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[    3.790206] RPC: Registered udp transport module.
<6>[    3.790428] RPC: Registered tcp transport module.
<6>[    3.790476] lib80211: common routines for IEEE802.11 drivers
<7>[    3.790509] lib80211_crypt: registered algorithm 'NULL'
<6>[    3.791148] clock_late_init() disabled 17 unused clocks
<6>[    3.791786] adp5588: using input dev headset for key reset
<6>[    3.791846] adp5588: using input dev adp5588_morrison for key reset
<6>[    3.792584] GPIO Input Driver: Start gpio inputs for morrison-kpd in interrupt mode
<6>[    3.792859] GPIO Input Driver: Start gpio inputs for morrison-kpd in interrupt mode
<6>[    3.793396] input: morrison-kpd as /devices/virtual/input/input6
<6>[    3.793848] adp5588: using input dev morrison-kpd for key reset
<3>[    3.794694] Using very old AMSS modem firmware.
<6>[    3.794949] VFP support v0.3: not present
<4>[    3.796953] key08_ts_probe: Enter
<4>[    3.797349] key08_ts_init: misc_register(pf) returns 0
<4>[    3.797396] key08_ts_probe: paltform data for 'key08', num_resources 1
<4>[    3.797428] key08_ts_probe: Got resource. Normal Addr: 0x11, Bootloader: 0x5f
<4>[    3.797456] key08_ts_probe: attached, client: 0xcf9c0000
<4>[    3.797479] key08_ts_probe: irq: 0x69
<3>[    3.797499] key08_ts_probe STARTED
<3>[    3.797518] key08_ts_probe Getting Versions
<6>[    3.797741] RPC_TIME_TOD_SET_APPS_BASES:
<6>[    3.797756]     tick = 200253
<6>[    3.797763]     stamp = 1026516069
<6>[    3.799024] rs30000048:00020000 rs30000048:00020000: setting system clock to 2011-09-16 14:37:50 UTC (1316183870)
<4>[    3.811259] key08_ts_probe: (1) receiving from 0x11(number of bytes: 6, type: 7): 0x70, 0x90, 0x30, 0x36, 0xe, 0xe
<4>[    3.831209] key08_ts_probe: (2) receiving from 0x11(number of bytes: 6, type: 7): 0x70, 0x50, 0x30, 0x36, 0xe, 0xe
<4>[    3.851186] key08_ts_probe: (3) receiving from 0x11(number of bytes: 6, type: 7): 0x70, 0x10, 0x30, 0x36, 0xe, 0xe
<4>[    3.871563] key08_ts_probe: (4) receiving from 0x11(number of bytes: 6, type: 7): 0x70, 0x0, 0x30, 0x36, 0xe, 0xe
<4>[    3.891248] key08_ts_probe: Got all data.
<4>[    3.911218] key08_ts_probe: Chip ID 0x30
<4>[    3.928689] mmc0: host does not support reading read-only switch. assuming write-enable.
<6>[    3.928761] mmc0: new high speed SDHC card at address 1234
<6>[    3.929601] mmcblk0: mmc0:1234 SA08G 7.42 GiB
<6>[    3.930183]  mmcblk0:key08_ts_probe: Product Code Version 0x36
<4>[    3.931509] key08_ts_probe Initializing Panel
<3>[    3.931588] key08_ts_probe: max_x 1023, max_y 1023
<3>[    3.931618] key08_ts_probe: inactive_x 0 0, inactive_y 0 0
<6>[    3.932694] input: touchscreen as /devices/virtual/input/input7
<6>[    3.933174] adp5588: using input dev touchscreen for key reset
<4>[    3.933218] key08_ts_probe Gpio request
<4>[    3.933256] key08_ts_probe: ret from gpio_direction_input = 0
<3>[    3.933286] key08_ts_probe: gpio_request KEY08_TS_GPIO =  1
<6>[    3.933471] key08_ts_probe: Start touchscreen touchscreen in interrupt mode
<4>[    3.933759]  p1 p2
<3>[    3.935559] msm_sdcc_setup_power - ENABLING...WIFI
<4>[    3.990323] key08_ts_probe: GPIO 84: 1
<4>[    3.990416] key08_ts_probe: Exit
<6>[    3.998229] Freeing init memory: 152K
<4>[    3.998369] Warning: unable to open an initial console.
<3>[    4.193684] msm_sdcc_setup_power - DISABLING...WIFI
<6>[    4.370833] yaffs: dev is 32505857 name is "mtdblock1"
<6>[    4.370886] yaffs: passed flags ""
<4>[    4.370914] yaffs: Attempting MTD mount on 31.1, "mtdblock1"
<4>[    4.508024] yaffs: restored from checkpoint
<4>[    4.508544] yaffs_read_super: isCheckpointed 1
<6>[    4.509479] yaffs: dev is 32505858 name is "mtdblock2"
<6>[    4.509523] yaffs: passed flags ""
<4>[    4.509549] yaffs: Attempting MTD mount on 31.2, "mtdblock2"
<4>[    4.572663] yaffs: restored from checkpoint
<4>[    4.575716] yaffs_read_super: isCheckpointed 0
<6>[    4.576349] yaffs: dev is 32505861 name is "mtdblock5"
<6>[    4.576391] yaffs: passed flags ""
<4>[    4.576416] yaffs: Attempting MTD mount on 31.5, "mtdblock5"
<4>[    4.588299] yaffs: restored from checkpoint
<4>[    4.588459] yaffs_read_super: isCheckpointed 1
<6>[    5.000253] hsusb set_configuration wValue = 1 usbcmd = 1
<6>[    5.001438] usb_mass_storage usb_mass_storage: config #1
<6>[    5.003418] msm_chg_usb_i_is_available
<3>[    5.090914] init: service 'console' requires console
<3>[    5.108021] init: cannot find '/system/bin/fmradioserver', disabling 'fmradio'
<3>[    5.146179] init: cannot find '/system/bin/port_bridge', disabling 'port_bridge'
<6>[    5.146648] enabling adb function
<6>[    5.146786] usb_function_enable: name = adb, enable = 1
<6>[    5.342481] SMD: ch 38 CLOSED -> OPENING
<6>[    5.342636] SMD: ch 38 OPENING -> OPENED
<6>[    5.343278] SMD: ch 39 CLOSED -> OPENING
<6>[    5.343394] SMD: ch 39 OPENING -> OPENED
<6>[    5.343896] SMD: ch 40 CLOSED -> OPENING
<6>[    5.344009] SMD: ch 40 OPENING -> OPENED
<6>[    5.454918] warning: `rild' uses 32-bit capabilities (legacy support in use)
<6>[    6.151334] usb_set_composition: composition set to product id = 2d66
<3>[    6.152074] msm_hsusb_is_serial_num_null: rpc call success
<3>[    6.152733] msm_hsusb_send_serial_number: rpc call failed! error: -22
<3>[    6.153391] msm_hsusb_send_productID: rpc call success
<6>[    6.179046] msm_hsusb_phy_reset
<6>[    6.305963] hsusb suspend interrupt
<6>[    6.309503] msm_chg_usb_i_is_not_available
<6>[    6.420793] hsusb reset interrupt
<6>[    6.421198]
<6>[    6.421213] **** Charger Type: HOST PC
<6>[    6.421221]
<6>[    6.423084] hsusb resume: speed = HIGH
<6>[    6.427211] msm_chg_usb_charger_connected
<6>[    6.427364] hsusb: IDLE -> ONLINE
<6>[    6.619058] hsusb reset interrupt
<6>[    6.621339] hsusb resume: speed = HIGH
<6>[    7.573041] [msm-audio:snd.c:snd_ioctl] snd_set_volume 16 0 15
<6>[    7.574111] [msm-audio:snd.c:snd_ioctl] snd_set_volume 25 0 15
<6>[    7.574993] [msm-audio:snd.c:snd_ioctl] snd_set_volume 12 0 15
<6>[    7.576174] [msm-audio:snd.c:snd_ioctl] snd_set_volume 3 0 15
<6>[    7.577076] [msm-audio:snd.c:snd_ioctl] snd_set_volume 5 0 15
<6>[    7.578019] [msm-audio:snd.c:snd_ioctl] snd_set_volume 4 0 15
<6>[    7.578846] [msm-audio:snd.c:snd_ioctl] snd_set_volume 8 0 15
<6>[    7.579699] [msm-audio:snd.c:snd_ioctl] snd_set_volume 9 0 15
<6>[    7.580834] [msm-audio:snd.c:snd_ioctl] snd_set_volume 10 0 15
<6>[    7.581768] [msm-audio:snd.c:snd_ioctl] snd_set_volume 16 0 15
<6>[    7.582684] [msm-audio:snd.c:snd_ioctl] snd_set_volume 25 0 15
<6>[    7.583519] [msm-audio:snd.c:snd_ioctl] snd_set_volume 22 0 15
<6>[    7.584441] [msm-audio:snd.c:snd_ioctl] snd_set_volume 23 0 15
<6>[    7.585658] [msm-audio:snd.c:snd_ioctl] snd_set_volume 6 0 15
<6>[    7.586528] [msm-audio:snd.c:snd_ioctl] snd_set_volume 27 0 15
<6>[    7.620896] [msm-audio:snd.c:snd_ioctl] snd_set_device 25 1 0
<6>[    7.623784] [msm-audio:snd.c:snd_ioctl] snd_set_volume 16 0 15
<6>[    7.624646] [msm-audio:snd.c:snd_ioctl] snd_set_volume 25 0 15
<6>[    7.625841] [msm-audio:snd.c:snd_ioctl] snd_set_volume 12 0 15
<6>[    7.626669] [msm-audio:snd.c:snd_ioctl] snd_set_volume 3 0 15
<6>[    7.627629] [msm-audio:snd.c:snd_ioctl] snd_set_volume 5 0 15
<6>[    7.628494] [msm-audio:snd.c:snd_ioctl] snd_set_volume 4 0 15
<6>[    7.629368] [msm-audio:snd.c:snd_ioctl] snd_set_volume 8 0 15
<6>[    7.631196] [msm-audio:snd.c:snd_ioctl] snd_set_volume 9 0 15
<6>[    7.632103] [msm-audio:snd.c:snd_ioctl] snd_set_volume 10 0 15
<6>[    7.633068] [msm-audio:snd.c:snd_ioctl] snd_set_volume 16 0 15
<6>[    7.633956] [msm-audio:snd.c:snd_ioctl] snd_set_volume 25 0 15
<6>[    7.634784] [msm-audio:snd.c:snd_ioctl] snd_set_volume 22 0 15
<6>[    7.635908] [msm-audio:snd.c:snd_ioctl] snd_set_volume 23 0 15
<6>[    7.636873] [msm-audio:snd.c:snd_ioctl] snd_set_volume 6 0 15
<6>[    7.637818] [msm-audio:snd.c:snd_ioctl] snd_set_volume 27 0 15
<6>[    8.119591] hsusb set_configuration wValue = 1 usbcmd = 80001
<6>[    8.119926] usb_mass_storage usb_mass_storage: config #1
<6>[    8.122994] msm_chg_usb_i_is_available
<6>[   10.940433] BLUETOOTH: bt_power: ON
<3>[   16.160926] init: untracked pid 149 exited
<6>[   23.392278] accel_open: open request from pid 156
<6>[   23.392343] accel_add_client: added client pid 156
<6>[   23.392429] accel_remove_client: removed client pid 156
<6>[   23.392611] accel_open: open request from pid 156
<6>[   23.392654] accel_add_client: added client pid 156
<6>[   23.392936] accel_set_mode: 1 s 4g; mode 1, ODR 0, FS 1
<6>[   23.392989] accel_i2c_set_config: mode=1 (raw data), odr=0 (10Hz), fs=1, interval=100
<6>[   23.393006]
<6>[   23.393473] accel_i2c_set_config: setting poll_interval to 100ms
<6>[   23.396044] accel_remove_client: removed client pid 156
<6>[   23.815079] hw3d_open: pid 167 tid 174 opening client node
<4>[   23.881726] remapping device 1b3
<6>[   23.912556] hw3d_open: pid 156 tid 162 opening master node
<6>[   32.070804] bcm_wlan_power_on: power_mode 1
<3>[   32.071053] msm_sdcc_setup_power - ENABLING...WIFI
<7>[   32.290456] mmc1: card_present 1
<6>[   32.290513] mmc1: Slot status change detected (0 -> 1)
<6>[   32.345458] [msm-audio:snd.c:snd_ioctl] snd_set_volume 16 0 5
<6>[   32.347041] [msm-audio:snd.c:snd_ioctl] snd_set_volume 25 0 5
<6>[   32.348361] [msm-audio:snd.c:snd_ioctl] snd_set_volume 12 0 5
<6>[   32.350031] [msm-audio:snd.c:snd_ioctl] snd_set_volume 3 0 5
<6>[   32.352114] [msm-audio:snd.c:snd_ioctl] snd_set_volume 5 0 5
<6>[   32.353596] [msm-audio:snd.c:snd_ioctl] snd_set_volume 4 0 5
<6>[   32.354936] [msm-audio:snd.c:snd_ioctl] snd_set_volume 8 0 5
<6>[   32.356228] [msm-audio:snd.c:snd_ioctl] snd_set_volume 9 0 5
<6>[   32.358623] [msm-audio:snd.c:snd_ioctl] snd_set_volume 10 0 5
<6>[   32.360663] [msm-audio:snd.c:snd_ioctl] snd_set_volume 16 0 5
<6>[   32.361999] [msm-audio:snd.c:snd_ioctl] snd_set_volume 25 0 5
<6>[   32.363374] [msm-audio:snd.c:snd_ioctl] snd_set_volume 22 0 5
<6>[   32.364796] [msm-audio:snd.c:snd_ioctl] snd_set_volume 23 0 5
<6>[   32.366454] [msm-audio:snd.c:snd_ioctl] snd_set_volume 6 0 5
<6>[   32.368001] [msm-audio:snd.c:snd_ioctl] snd_set_volume 27 0 5
<4>[   32.401153]
<4>[   32.401166] Dongle Host Driver, version 4.217.34.14
<4>[   32.401178] Compiled in /home/nelson/workspace/system/wlan/bcm/osrc/open-src/src/dhd/linux/../.. on Jul 31 2011 at 08:05:26
  评论这张
 
阅读(1596)| 评论(0)
推荐 转载

历史上的今天

在LOFTER的更多文章

评论

<#--最新日志,群博日志--> <#--推荐日志--> <#--引用记录--> <#--博主推荐--> <#--随机阅读--> <#--首页推荐--> <#--历史上的今天--> <#--被推荐日志--> <#--上一篇,下一篇--> <#-- 热度 --> <#-- 网易新闻广告 --> <#--右边模块结构--> <#--评论模块结构--> <#--引用模块结构--> <#--博主发起的投票-->
 
 
 
 
 
 
 
 
 
 
 
 
 
 

页脚

网易公司版权所有 ©1997-2017